Repeat this step also for the other corner.Ĭlick Breken kromme (break curve apart) to disconnect the line from the shape Use the shape tool to select the corner of the shared line. You can fix this by selecting the one the objects. This is also cut twice and results in a lower level of precision and bigger burn marks. For example two rectangles that are drawn against each other. So please check this to be sure the material is not cut twice.Ī more common problem is shapes that have one shared side. Double lines take longer to cut, cost twice as much, leave a bigger burn mark on the edges and damage the cutting table. If this is case you also need to delete the rest. Delete one line to see whether there is another one underneath. These lines look darker than single lines. They lie on top of each other and are hard to notice. It’s possible your drawing consist of double lines after importing an illustrator EPS. The cutter works in the following order: Desc.įor example, black is deep engraving, red is shallow engraving, yellow are the inner cutting lines and blue the outer cutting lines. Remember to only use this in extraordinary cases. It is possible to have more control over the cutting order when something has to be engraved at different depths for example. It automatically first cuts the smallest parts and works its way to the bigger parts. It is not necessary to manually give in the order in which the machine engraves or cuts. The laser cutter optimizes the cutting process. For more details see the cutting or engraving part of this tutorial. Engraving can be done by not using a stroke and only use a greyscale to black fill. Vector engraving lines have to be RGB blue with a stroke weight of 0.01mm without any fill. This way the font is converted to paths and will keep its appearance.Īttention!: Do this step in the end of the process because you cannot change the text after this step.Ĭutting lines have to be RGB red with a stroke weight of 0.01mm without any fill. The only thing you need to do is convert it to outlines. Delete the bitmap before sending the file.Ĭutting lines have to be RGB red with a stroke weight of 0.01mm without any fill. Select the image and click Bitmaps -> Bitmap overtrekken (trace bitmap)Īttention!: The original bitmap is still behind the traced image. If you want to cut or vector engrave them, you need to convert these images (JPEG,BMP, PNG, etc.) to vector line drawings. Rasterized or bitmap images can only be engraved. White is not engraved, light grey is the shallowest and black the densest. The density control is exactly the same as with fills. Color images are being converted to a greyscale image via dithering. The laser cutter can interpret raster images for engraving without any problems. Gradients can also be used and are treated the same way by the machine. All shades of grey in between make a difference in density. On average light grey (RGB – 230,230,230) is the shallowest and black the densest. By using shades of grey you can control the density of the engraving. De color is RGB blue which is also available in the color pallet.Īll fills are engraved. You can download the correct swatches that can be imported to CorelDRAW here. The stroke weight has to be Hairline and the color RGB red. These are the outlines of the shape you want to cut. The options are probably at the same place in the English version. The file contains the margins and colors you can use.Īttention!: The screenshots are in Dutch. How to setup a file that our laser can work with?Ĭhoose the size of the material you want to use.
0 Comments
Leave a Reply. |